school_kashuk ‼️МОСКВА, 11 ОКТЯБРЯ‼️

Впервые за 5 лет я проведу тренинг в Москве!

РАСШИРЕННАЯ ПРОГРАММА ПО ТОКСИНУ: ЛИЦО + ТЕЛО

📆 11 октября - B0T0X: TOP LEVEL

На тренинге мы научим вас работать:
- безопасно и красиво
- максимально эффективно
- без страха
- по самым современным техникам

В программе тренинга-практикума:
* анатомия мышц лица и шеи
* биомеханика мышц
* FULL FACE токсином: верхняя, средняя нижняя трети
* гипергидроз (подмышки, кожа головы, ступни, ладошки и др)
* Уменьшение, сужение, поднятие НОСА
* методы работы с мигренью, остеохондрозом
* лабутены (лёгкие ножки)
* работа с икроножными мышцами
* точка голода
* работа БТА с себореей кожи головы
* поднятие ягодиц тоksiном (ПОПА КИМ)
* разбор осложнений и методы работы с ними для достижения максимального эффекта

⏰ Расчетное время тренинга с 10:00 до 18:00
👍🏽Практика на моделях (моделей предоставляем)
🎓группа 8-9 студентов

school_kashuk Marking for working with the zygomatic and buccal areas
Draw a line from the superior helix of the ear to the ala of the nose.
The second line is drawn from the lateral orbital rim to the corner of the mouth.
The intersection of these two lines is the McGregor’s point.
From this point, we trace the first vector for zygomatic augmentation and the second vector for buccal correction.
______

school_kashuk ❓BAP — what are these points

We all love biorevitalization, but we don’t want to have bruises and papules on the face I.
Bio Aesthetic Points — they are connected to the ligaments and we injected the product under the ligaments.
Where are these ligaments located and where are these five points:
1️⃣ zygomatic ligament
2️⃣ masseter ligament
3️⃣ McGregor’s point
4️⃣ lower cheek point
5️⃣ mandibular ligament

I also like to work with the septum of the forehead.Where is this septal ligament located?
Where our frontal belly connects with the temporalis, and here our ligament points are located.
Work with pleasure and make your patients happy!
_____
Svetlana Kashuk — the Highest Category Doctor, International Trainer, Certified Speaker on Botulinum Toxins, a Founder of the İnternational Academy of the Cosmetologists
⠀
Manager Mariia
📲 +7(960)742-63-78

school_kashuk Let’s talk about syringes for working with botulinum toxin.
For the face, we only work with a strict dilution of 1:1, because this area contains high-risk zones and we do not need wide diffusion. For the body, however, we may work with dilutions of 1:2 or 1:4.
Now, about syringes.
There are syringes for 50 and 100 units.
If we work with a strict 1:1 dilution, we should use a 0.5 ml syringe. In this case, each division corresponds to one unit of toxin.
* 10 units = 10 divisions.
* With a 0.5 ml syringe and strict dilution, 1 division = 1 unit. Very easy to remember.
* If you need 50 units, simply draw 50 divisions into the syringe.
If we use a 1 ml syringe with the same 1:1 dilution, each division will already contain two units of toxin, and this is where mistakes may happen.
For example: if you need to inject 20 units, you might draw 20 divisions and inject them into the patient. But this will be an error, because each division contains two units. Instead of 20 units, you will have injected 40 units.
Colleagues, never get confused—be attentive and always choose the 0.5 ml syringe.
One division = one unit.

school_kashuk 👄LIPS👄

I start the first injection from the top point of Cupid and apply the filler in this way.
From one input point I lay out three vectors, but the vectors should be very close to each other. The second vector and the third vector.
The second injection - I retreat below the lip contour, never go to the lip contour, otherwise there will be a white hyaluronic mustache.
From the second injection point I create three vectors, till the mucosa. We never go below the mucous membrane! The third point is a little bit lower, and we lay out such vectors. The needle should only be 31G x12mm. We don’t use fillers own needle, otherwise you’ll have bumps like this. I don’t go 0.5 cm to the commissura otherwise creases like this will appear above the lip, this is absolutely not necessary for either you or your patient.
If the patient has gull wing shape lips, that is, here the labial muscle curls the lip, then I lay out the second row and apply the filler in this way, pulling this curls up. Second point...You will notice how the vectors are next to each other and intersect...on my way back I leave the filler.
This is how we get beautiful lips!
Lower lip - we start from the middle, the first injection begins from the border and I also lay out the filler by retrograde technique. Three vectors from one injection point .Second point - a little bit higher - again three vectors from one point and a third point - I will also have three vectors. I always pull the needle towards the middle so that we get such a beautiful heart shape. We also lay out the vectors on the other side in the same way.
I don’t go into the middle at all, I don’t make it heavier so that I get this elongated heart.
This is how we basically work with lips!
But sometimes the labial muscle is in hypertonic and then we definitely need to relax it with a toxin, both the upper and lower lips. And I will show you how to relax it with a toxin in the next reels;)
Be with me and work beautifully, and the patients will say a big thank you for it.
____

school_kashuk Today, let’s talk about how to avoid such undesirable effects as lymphostasis and headaches.
It’s all about placing the injection points of botulinum toxin correctly to prevent these complications.
🔹 When treating the frontalis muscle, always use the minimum number of units.
If you inject more than 15 units into this area, you risk brow ptosis and triggering headaches.
My recommendation: inject no more than 15 units into the frontalis.
🔹 To prevent lymphostasis, never inject toxin into the soft lower eyelid.
And avoid placing too many units into the upper lateral part of the orbicularis oculi muscle, right under the brow.
🔹 Remember: the lateral portion of the orbicularis oculi is a single-bellied muscle.
You can safely inject into this area in two or even three rows — nothing wrong with that.
⚠️ But if you overdose botulinum toxin in the upper or lower eyelid zones, your patient will wake up with significant periorbital edema.

school_kashuk DEPRESSOR SUPERCILII ans ITS FUNCTION

In our globella area there are two paired muscles - these are our corrugators and depressor superciliı.
The function of the corrugators are to move the eyebrows to the middle, the depressor supercilii pulls the corners of the eyebrow down, to the nose.
Therefore, when you relax only the corrugators, there is not enough diffusion to the depressor supercilii and therefore you get this eagle look - angry, eagle-like.

Patients don’t like it very much and they complain. Invite the patient and inject 1 unit very superficially, because it is a superficial muscle - the depressor supercilii.
This muscle is thin and superficial, but it can be very long, so the patient may be dissatisfied.
_______
Svetlana Kashuk — the Highest Category Doctor, International Trainer, Certified Speaker on Botulinum Toxins, a Founder of the İnternational Academy of the Cosmetologists
⠀
Manager Mariia
📲 +7(960)742-63-78

school_kashuk ✨ Let’s break down botulinum toxin dilution ✨
Students often get confused with this, so let’s make it crystal clear.
💉 Toxin = always 100 units per vial
It doesn’t matter how much saline you add — 1 ml, 2 ml, or 4 ml.
👉 The number of units remains the same — 100!
🔹 Tight dilution
100 units + 1 ml saline
➡️ Diffusion ~ 1 cm
🔹 Standard dilution
100 units + 2 ml saline
➡️ Diffusion ~ 2 cm
So, the more saline you add, the wider the diffusion zone — but the actual dose of toxin does not increase.
⚡ Remember: more water ≠ more units!
The right dilution means control over your work and predictable results for your patient.

school_kashuk Patients often complain about thin skin with a deficiency of subcutaneous fat tissue.
We observe elastosis.
They pull on the skin, and the skin without subcutaneous fat tissue stretches along with their fingers.

What do I recommend in this case?

The only drug that provides rigidity to our skin tissues is collagen stimulators such as RADIESSE and polylactic acid.
Gradually move away from fillers, especially for older individuals.
Polylactic acid not only gives volume but also improves skin quality.
______
Svetlana Kashuk — the Highest Category Doctor, International Trainer, Certified Speaker on Botulinum Toxins, a Founder of the İnternational Academy of the Cosmetologists

school_kashuk I am often asked this question: “Why don’t I see results from poly-L-lactic acid?”
I believe that poly-L-lactic acid and RADIESSE are the number one products on the market right now. These products are truly trending.
So why do some patients fail to see results?
1. Get tested for protein deficiency. Total protein should not be below 75 g/L. If it is lower, this deficit must be corrected.
2. Please make sure to take Vitamin C. It plays a key role in the synthesis of collagen.
Only together — adequate protein and Vitamin C — can deliver a beautiful, long-lasting, and effective result.
______